The NVIDIA Jetson AGX Orin Developer Kit is now available for purchase!

Big Picture

▪ Up to 275 INT8 TOPS powered by Ampere Tensor Cores GPU + DLA ▪ 12x A78 ARM CPU

▪ 32 GB memory, 204 GB/s

▪ $1999

▪ Available Now

Who is it for?

As you can see from the price, this Jetson is targeted towards the professional development crowd. The dev kit can be set up into different configurations to emulate the different Jetson Orin modules that will be available in Q4. Each of these modules have different configurations with regards to the amount of power they consume, the number of CPU cores, and the number of GPU cores. Good stuff!

Check out the official NVIDIA Jetson Orin page for ordering info.

There are now over 1 Million Jetson developers!!!!

Excuses, Excuses …

Normally on a big release like this, NVIDIA provides JetsonHacks with an early production version before the release. However this year there was a little issue. China initiated a lockdown right when the Orin was on its way to JetsonHacks world headquarters. The AGX Orin is now sitting at an airport in Hong Kong waiting. My guess is that if they can convince it to leave the airport bar, it will get on the next plane to its new home. When we get the unit, we’ll go deep dive on it!

We’ll just drop a little info here, and wait for when we get our greedy little mitts on it to get the real info which we will share here.

The Software

The Jetson AGX Orin will run JetPack 5.0, which brings Ubuntu 20.04 with LTS Kernel 5.10. Some of the other highlights include CUDA 11 and new version of cuDNN and TensorRT. This is currently scheduled to be released March 30, 2022. It should run on both Orin and Xavier architectures.

One of the big announcements is that the NSight Tools Suite can now run natively on the Jetson Orin! That means the large number of professional level developer tools, such as the CUDA profiler, can now run natively, no host machine needed!

Jetson Orin Modules

The configuration and pricing for the Jetson Orin Modules has been announced. The modules will begin shipping in Q4, 2022. There are two configurations of both the AGX formats and NX formats.

Jetson AGX Orin 64GB and 32GB

Jetson AGX Orin 64GB​
275 Sparse|138 Dense INT8 TOPS
15W to 60W
$1599 (1KU+)

Jetson AGX Orin 32GB
200 Sparse|100 Dense INT8 TOPS
15W to 40W
$899 (1KU+)

Jetson Orin NX 16GB​ and 8GB

Jetson Orin NX 16GB
100 Sparse|50 Dense, INT8 TOPS
10W to 25W
$599 (1KU+)

Jetson Orin NX 8GB
70 Sparse|35 Dense, INT8 TOPS
10W to 20W
$399 (1KU+)

Jetson AGX Orin Developer Kit Specifications

AI Performance 275 TOPs
GPU NVIDIA Ampere architecture with 2048 NVIDIA® CUDA® cores and 64 tensor cores
CPU 12-core Arm Cortex-A78AE v8.2 64-bit CPU
3MB L2 + 6MB L3
DL Accelerator 2x NVDLA v2.0
Vision Accelerator PVA v2.0
Memory 32GB 256-bit LPDDR5
204.8 GB/s
Storage 64GB eMMC 5.1
Video Encode 2x 4K60 | 4x 4K30 | 8x 1080p60 | 16x 1080p30 (H.265)
Video Decode 1x 8K30 | 3x 4K60 | 7x 4K30 | 11x 1080p60 | 22x 1080p30 (H.265)

Refer to the Software Features section of the latest NVIDIA Jetson Linux Developer Guide for a list of supported features

Camera 16 lane MIPI CSI-2 connector
PCIe x16 PCIe slot:
Lower x8 PCIe Gen4
RJ45 Up to 10 GbE
M.2 Key M x4 PCIe Gen 4
M.2 Key E x1 PCIe Gen 4, USB 2.0, UART, I2S
USB Type-C 2x USB 3.2 Gen2 with USB-PD support
USB Type-A 2x USB 3.2 Gen2
2x USB 3.2 Gen1
USB Micro-B USB 2.0
DisplayPort DisplayPort 1.4a (+MST)
microSD slot UHS-1 cards up to SDR104 mode
Other 40-pin header (I2C, GPIO, SPI, CAN, I2S, UART, DMIC)
12-pin automation header
10-pin audio panel header
10-pin JTAG header
4-pin fan header
2-pin RTC battery backup connector
DC power jack
Power, Force Recovery, and Reset buttons
Dimensions 110mm x 110mm x 71.65mm
(Height includes feet, carrier board, module, and thermal solution)

About admin


Leave a Reply

Your email address will not be published.

Previous post JetPack 4.6.1 Production Release
Next post Jetson Orin Documents Available